Correct method of RandM 7000 Puffs E-cigarette factoryelectric smoke suppression

1. Take down the nozzle of the electric smoke atomizer first, then inject the RandM 7000 Puffs E-cigarette factory electric smoke oil into the electric smoke atomizer, then install the nozzle on the atomizer, and finally rotate the electric smoke battery and the electric smoke atomizer. The electric smoke can only be started by pressing 5 times for the electric smoke shift gear. When the electric smoke battery head turns red, it means that the electric smoke has started to work.

2. When it is not inhaled, the finger lamp will turn off. Generally, the charging time of each RandM 7000 Puffs E-cigarette factory electric smoke battery is controlled at 2-3 hours. Smokers usually smoke for about 15puffs。

3. After 20-30 days, the atomization amount is still significantly reduced when the new cigarette bombs and batteries are fully charged. Please take out the cigarette bombs, and insert the needles into the holes on the front end of the cigarette body. At this time, the simulated burning cigarette butts will continue to glow, and each time the RandM 7000 Puffs E-cigarette factory cigarette butts are inserted for 10 seconds. Each recovery can be repeated twice. After the function is restored, the cigarette butts can be normally used. This switch should not be used frequently.

4. In the process of charging, when the simulated burning RandM 7000 Puffs E-cigarette factory cigarette end at the front end of the machine becomes obviously dark, a special charger shall be attached to the machine to charge the battery. When charging, please place the battery according to the positive and negative signs on the charger. Do not put it upside down. After 3-4 hours of charging, when the indicator light of the charger changes from red to green, it means that the battery is fully charged. Please remove the battery and disconnect the power supply of the charger.